Aircraft that had taken off from Newark hit the front landing gear three times with ‘abnormal force’, which caused damage to the crown of the upper fuselage, reported the NTSB. //

According to the NTSB, the Boeing 767-300 N671UA registration suffered three heavy hits on the front landing gear, with force equivalent to 1.4 g, 1.6 g and again 1.6 g when the widebody ended up bouncing during the braking attempt. //

“A preliminary review of the flight data recorder (FDR) revealed that after the initial touchdown on both main wheels, the airplane rolled to the left and right main gear lifted off the runway’s surface. Subsequently, the nose wheel touched down with a gravitational force equivalent (g) of about 1.4 g and bounced,” wrote the NTSB.

“The speed brakes deployed, and the nose wheel impacted the runway a second time with a force of about 1.6 g followed by another bounce. The right thrust reverser (TR) deployed, and the nose wheel impacted the runway again with a force of about 1.6 g followed by the deployment of the left TR.”

Find out what black holes are, who discovered them, how we know they exist and what would happen if you fell into a black hole.

A bounty of $12,288 has been announced for the first person to crack the NIST elliptic curves seeds and discover the original phrases that were hashed to generate them.

 
Jordan Schachtel @ dossier.today @JordanSchachtel
·
The leader of Hamas lives at the Four Seasons in Doha. Today he told everyone in Gaza to stay put and act as human shields instead of evacuating to safety.

Joe Truzman @JoeTruzman
Iranian Foreign Minister Hossein Amirabdollahian met with Hamas leader Ismail Haniyeh in Doha, Qatar today.
Embedded video
4:47 PM · Oct 14, 2023 //

Ariel Oseran @ariel_oseran
·
IDF says Hamas placed roadblocks in the Gaza Strip to prevent Palestinians from evacuating south. Earlier, the IDF warned it would strike in the north of the enclave. Hamas leader Haniyeh: "Our people will not leave or migrate. We call on them not to fall for the enemy's lies."

1:45 PM · Oct 14, 2023